ABB LST300 - Menu: Service

38 LST300 | COMPACT ULTRASONIC LEVEL TRANSMITTER | LST300–EN REV. E
Menu / Parameter Value range Description
Calibrate / Calibration / Dry
Lower Sensor Point  Lower sensor point for level calibration
Upper Sensor Point  Upper sensor point for level calibration
Lower Level Point  Lower level point for level calibration
Upper Level Point  Upper level point for level calibration
Calibrate / Calibration / Wet
Lower Sensor Point Display Only Result lower sensor point for level calibration
Upper Sensor Point Display Only Result upper sensor point for level calibration
Lower Level Point  Lower level point for level calibration
Upper Level Point  Upper level point for level calibration
Wet Calibrate Lower - Wet calibrate lower sensor point
Wet Calibrate Upper - Wet calibrate upper sensor point
Calibrate / Linearization
Linearization Table - Linearization Table configuration interface
Active Table Disable, Enable Enable or disable the linearization table
Max Flow 

/h The maximum flow value of the channel
Max Volume 

The maximum volume of the vessel
Menu: Service
Refer to the service manual for more details.
Alarm Simulation
Device with HART protocol
Software SWxxxxxxxxx
Software version Type of changes Operating instructions
 Original 