ABB OMD800 - Page 38

38
AUTOMATIC CONTROL UNIT, OMD800
Table 7.4 Parameters and values of the Device Configuration
Parameter Values
Language Selection English
Deutsch
Francais
Italiano
Espanol
Suomi
Russian
Chinese
Change Password Retype New Password
INVALID PASSWORD
PASSWORD CHANGED
Digital Inputs
User can configure Function and Contact Type (NO/NC) for Digital Inputs 4-11. Available functions are
described in Table 7.5. Factory settings are described in Section .2.1.
Digital Inputs
Digital Input 4
Digital Input 5
Digital Input 6
1/8
A07137
Device Configuration
Digital Inputs
Digital Outputs
Voltage Tresholds
1/12
KA00272
Figure 7.24 Digital Inputs, user can configure Function (see Table 7.5) and Contact Type for Digital
Inputs 4-11