112 Low Voltage Products & Systems
AC 1006.9 - 5/03 ABB Inc. • 888-385-1221 • www.abb-control.com
*) For the purpose of having one common EDS for the whole range of
softstarters, “Setting Ie”, “1st Set Ie”, “2nd Set Ie” and “3rd Set Ie” have the
range 0 - 3000 Amp. The softstarter in itself will have a much more narrow range
which is defined by its rated current. Only values within the softstarter’s range
will be accepted.
Chapter 8 - Fieldbus communication (option)
16 Bit Mask for Events on
Relay outputs
Bit 0 Overload
Bit 1 Fault
Bit 2 High I
Bit 3 SCR OL
Bit 4 Locked Rotor
Bit 5 Underload
Bit 6 Phase Imb
Bit 7 PTC
Bit 8 Phase Rev
Bit 9 Warn OL
Bit 10 Warn SCR OL
Bit 11 Warn I=High
Bit 12 Warn I=Low
Bit 13 Spare
Bit 14 Spare
Bit 15 Spare
To Next Page
Loading...
