92 Low Voltage Products & Systems
AC 1006.9 - 5/03 ABB Inc. • 888-385-1221 • www.abb-control.com
Chapter 7 - Settings and configuration
Figure 32: Presentation Settings menu
Top level
Settings
Application setting
Basic settings
Functional settings
Presentation settings
Service settings
All settings
Changed settings
Reset all settings
7:2.5 Presentation Settings
The Presentation setting menu consists of parameters for
the LCD set-up. The presentation language can be chosen
among 10 different languages. The real-time clock for the
softstarter can be set in this menu.
Enter the Presentation settings
Enter the menu by selecting
Presentation Set
.
Presentation language
To set the desired presentation language on the LCD, press
Change
and
Store
the selected language. Country codes are
based on ISO 3166.
Available languages are:
In case the wrong language is selected, follow the “emer-
gency instructions” below to reach this parameter:
Press left selection key twice.
Press lower navgation key three times.
Press left selection key twice.
Use the navigation keys to find the required language
abbeviation.
Press left selection key to save the parameter.
Language Abbreviation in LCD
English US/UK
Chinese CN
German DE
Spanish ES
French FR
Italian IT
Dutch NL
Portuguese PT
Swedish SE
Finnish FI
To Next Page
Loading...
