ABB PST User Manual

Low Voltage Products & Systems 91
ABB Inc. • 888-385-1221 • www.abb-control.com AC 1006.9 - 5/03
Chapter 7 - Settings and configuration
Second sequence parameters (2nd Seq .Param.)
To set parameters related to the second sequence, enter the
2nd Seq. Param. group.
The following parameters can be adjusted:
2nd Set Ie Setting current.
Start Ramp2 Ramp time for start.
Init Volt2 Initial voltage.
Curr Lim2 Current limit.
Press Store to save the selected parameter.
Third sequence parameters (3rd Seq .Param.)
To set parameters related to the third sequence, enter the
3rd Seq. Param. group.
The following parameters can be adjusted:
3rd Set Ie Setting current.
Start Ramp3 Ramp time for start.
Init Volt3 Initial voltage.
Curr Lim3 Current limit.
Press Store to save the selected parameter.

ABB PST Specifications

General

Brand	ABB
Model	PST
Category	Controller
Language	English