Low Voltage Products & Systems 67
ABB Inc. • 888-385-1221 • www.abb-control.com AC 1006.9 - 5/03
Chapter 7 - Settings and configuration
Status of inputs/outputs
The status of the Programmable inputs and outputs is
displayed with “0” for not activated or “1” for activated. The
figures have the following functions:
SCR Temperature
The temperature of the SCRs in the softstarter is displayed
as a percentage of the maximum value.
Keypad status
Information on whether the keypad is locked or unlocked.
How to operate, see Chapter 6 “Human-Machine Interface
(HMI)”.
Change Password
Menu for changing the password, How to operate, see
Chapter 6 “Human-Machine Interface (HMI)”.
In=1000 Start signal high
In=0100 Stop signal high
In=0010 In0 high
In=0001 In1 high
Out=1000 Relay K4 activated
Out=0100 Relay K5 activated
Out=0010 Relay K6 activated
Out=0001 SW V7 activated
Figure 6: Input/outputs
Figure 7: SCR temperature
Figure 8: Keypad status
Figure 9: Change Password
In = 0000 Out = 0000
Back
SCR Temp 60%
Back
Keypad is Active
Back
Change Password
Select Back
To Next Page
Loading...
