76 Low Voltage Products & Systems
AC 1006.9 - 5/03 ABB Inc. • 888-385-1221 • www.abb-control.com
If overload “Dual” is selected, the following settings will
be available:
Overload start class (OL Class S)
Select the required overload class during start condition. The
following overload classes are available:
• 10
• 10A
• 20
• 30
Press
Store
to save the selected class.
Overload run class (OL Class R)
Select the required overload class during continuous run.
The following overload classes are available:
• 10
• 10A
• 20
• 30
Press
Store
to save the selected class.
Chapter 7 - Settings and configuration
To Next Page
Loading...
