- 115 -
000877BG
7 - Operation
6. Multiple Max Scan Enable
This settings allows you to Enables/disables the scan for identifying the
maximum power point of the system.
7. Multiple Max Scan Period
This settings allows you to sets the time between scans. Remember
that the shorter the scan interval the greater the loss of production, due
to the fact that energy is transferred to the grid during the scan but not
at the maximum power point. Each scan takes roughly 2 seconds.
Digital Inputs
In the Digital Inputs sub-menu you can disable or enable the Remote
ON/OFF functionality related to the “Remote” terminal block
37
.
To Next Page
Loading...
