- 116 -
000877BG
7 - Operation
Frequency Control: P(f) (Only visible and editable with
Admin Plus privileges)
In the Frequency Control: P(f) sub-menu you can cong settings re-
lated to the active power derating as function of grid frequency.
Do not change these parameters if not requested by the grid operator.
Ramp Control (Only visible and editable with Admin Plus
privileges)
In the Ramp Control sub-menu you can cong the parameter related
to the active power ramp up at the start-up and after a grid fault event.
Do not change these parameters if not requested by the grid operator.
Reactive Power Control (Only visible and editable with
Admin Plus privileges)
In the Reactive Power Control sub-menu you can congure settings
related the reactive power parameters using the following parameters
groups:
1. Watt/Cosphi Settings: Cosphi(P)
2. Q Set
3. Cosphi Set
4. Volt/VAr Settings: Q(V)
Do not change these parameters if not requested by the grid operator.
To Next Page
Loading...
Need help?
General