- 96 -
000875BG
7 - Operation
• Select the country standard and the conguration of the input channels.
conrm the setting by clicking “DONE”.The image shows the successful
commissioning.
in the SETTING section it’s possible to access the following sub-menus:
•RS485
•LAN
•WLAN
•Monitored Devices
RS485 (immagine 485): allows to set address, baud rate, parity mode
and communication protocol.
LAN (immagine lan):it’s possible to view the status and change the daisy
chain conguration of the two ethernet ports of the inverter.
WLAN (immagine wlan):it’s possible to view the status of the two wireless
channels of the inverter, and to disconnect the channel 2.
•Monitored Devices (monitored devices + add device): it’s possible to
add and cong the connected supported accessories to the RS485 ( in
this case, modify the data on the rs485 tab according to the characteri-
stics of the inserted device)
For more details about commissioning and any other functionalities of the Installer for Solar
Inverters mobile APP please contact ABB customer support.
For any other specic settings of parameters of single inverters please refer to “Description of
the Web User Interface” chapter.
To Next Page
Loading...
Need help?
General