Function IEC 61850 C D
Trip circuit supervision TCSSCBR 2 2
Current circuit supervision CCSPVC 1 1
Advanced current circuit supervision for line differential LNCTSRCTF 1 1
Fuse failure supervision SEQSPVC1 1
Protection communication supervision PCSITPC1 1 1
Runtime counter for machines and devices MDSOPT1 1 1
Measurement
Disturbance recorder RDRE 1 1
Load profile record LDPRLRC 1 1
Fault record FLTRFRC 1 1
Three-phase current measurement CMMXU 1 1
Sequence current measurement CSMSQI 1 1
Residual current measurement RESCMMXU 1 1
Three-phase voltage measurement VMMXU 2
Residual voltage measurement RESVMMXU 1
Sequence voltage measurement VSMSQI 1
Three-phase power and energy measurement PEMMXU 1
RTD/mA measurement XRGGIO130 (1)
Frequency measurement FMMXU 1
IEC 61850-9-2 LE sampled value sending
5)
SMVSENDER (1)
IEC 61850-9-2 LE sampled value receiving (voltage sharing)
5)
SMVRECEIVER (1)
Other
Minimum pulse timer (2 pcs) TPGAPC 4 4
Minimum pulse timer (2 pcs, second resolution) TPSGAPC 1 1
Minimum pulse timer (2 pcs, minute resolution) TPMGAPC 1 1
Pulse timer (8 pcs) PTGAPC 2 2
Time delay off (8 pcs) TOFGAPC 4 4
Time delay on (8 pcs) TONGAPC 4 4
Set-reset (8 pcs) SRGAPC 4 4
Move (8 pcs) MVGAPC 2 2
Generic control point (16 pcs) SPCGAPC 2 2
Analog value scaling SCA4GAPC 4 4
Integer value move MVI4GAPC 1 1
1, 2, ... = Number of included instances. The instances of a protection function represent the number of identical protection function blocks
available in the standard configuration.
() = optional
1) One of the following can be ordered as an option: admittance-based E/F, wattmetric-based E/F or harmonics-based E/F.
2) "Io measured" is always used.
3) Used for RTD/mA based protection or analog GOOSE, for example
4) Power quality option includes current total demand distortion, voltage total harmonic distortion and voltage variation.
5) Available only with COM0031...0037
1MRS758127 C Section 3
RED615 standard configurations
RED615 33
Application Manual
To Next Page
Loading...
