3.3 Standard configuration C
3.3.1 Applications
The standard configuration for line current differential protection including non-
directional earth-fault protection and autoreclosing is mainly intended for cable feeder
applications in the distribution networks. The standard configuration for line current
differential protection includes support for in-zone transformers.
The protection relay with a standard configuration is delivered from the factory with
default settings and parameters. The end-user flexibility for incoming, outgoing and
internal signal designation within the protection relay enables this configuration to be
further adapted to different primary circuit layouts and the related functionality needs
by modifying the internal functionality using PCM600.
1MRS758127 C Section 3
RED615 standard configurations
RED615 37
Application Manual
To Next Page
Loading...
