ABB RED615 - Other Functions

TPGAPC2
IN1
IN2
OUT1
OUT2
OR6
B1
B2
B3
B4
B5
B6
O
OR6
B1
B2
B3
B4
B5
B6
O
OR6
B1
B2
B3
B4
B5
B6
O
BACKUP_PROT_OPERATE_PULSE
PHIPTOC1_OPERATE
INTRPTEF1_OPERATE
PDNSPTOC1_OPERATE
EFHPTOC1_OPERATE
PSPTUV1_OPERATE
NSPTOV1_OPERATE
DPHxPDOC_OPERATE
DEFxPDEF_OPERATE
EFPADM_OPERATE
WPWDE_OPERATE
FREQUENCY_OPEATE
PHPTOV_OPERATE
PHPTUV_OPERATE
ROVPTOV_OPERATE
NSPTOC_OPERATE
BACKUP_PROT_OPERATE
BACKUP_PROT_OPERATE
GUID-39193B88-CF7E-4808-8C0C-3F9F3281AA8A V1 EN
Figure 115: Timer logic for backup protection operate pulse
3.4.3.8 Other functions
The configuration includes few instances of multipurpose protection MAPGAPC,
fault locator, harmonics-based earth-fault protection, high-impedance fault detection
function PHIZ, runtime counter for machines and devices MDSOPT and different
types of timers and control functions. These functions are not included in application
configuration but they can be added based on the system requirements.
1MRS758127 C Section 3
RED615 standard configurations
RED615 91
Application Manual