3.4.2 Setting the technical key
The maximum length of technical key is 28 characters for Edition 1
and 60 characters for Edition 2.
1. In the Plant Structure view, right-click the IED and select Set Technical Key
in IED.
GUID-49884564-74E5-4470-AC93-CFB115F716F7 V1 EN
Figure 8: PCM600: Setting the technical key on the IED level
A dialog box opens to inform about the technical key concept.
Section 3 1MRS241255 B
PCM600 tool
26 611 series
Engineering Manual
To Next Page
Loading...
