There are 20 GOOSERCV_BINs in 611 series protection relays. For 611 series
application, only GOOSE binary inputs can be connected. A maximum of 20 GOOSE
binary inputs can be taken into use.
For details of GOOSERCV_BIN applications and related switch group functions, see
the application manual.
GUID-372E0AE2-8761-4EC0-84F3-A42D2D21E6E5 V1 EN
Figure 44: Signal Matrix
5.3 Fault Record tool
The Fault Record tool is used for reading the fault records from the protection relay
and it is included in the connectivity packages. The tool makes analyzing the fault
records easier by showing them separately in their own user control components. It
also includes save, copy and clear functions where all the fault records are saved or
copied in text format for later viewing or cleared from the protection relay or the tool.
The fault record is saved to a local PC with the default name
FaultRecords.txt. Revise the file name before saving to avoid
overriding the old record.
5.3.1 Opening and closing Fault Record tool
• To open the Fault Record tool, right-click an IED node in the PCM600 project
tree and select Fault Record Tool.
1MRS241255 B Section 5
Protection and control engineering
611 series 61
Engineering Manual
To Next Page
Loading...
