A template IED can be inserted only when the bay is selected in the
plant structure.
1. In the Plant structure view, select the bay, right-click, point to New and select
Create from template.
The Create New Object from Template dialog box opens.
GUID-183FA487-E668-4D07-8F37-98B212DDCA32 V1 EN
Figure 28: PCM600: Selecting an IED from the template library
2. Select the IED from the list of available IEDs.
3. Click the icon on the right column in the list of available templates.
The Template Properties dialog box opens.
1MRS241255 B Section 4
Setting up a project
611 series 47
Engineering Manual
To Next Page
Loading...
