GUID-A663821B-5250-4C96-BB05-360D685A07BF V1 EN
Figure 49: Opening the Fault Record tool
• To close the Fault Record tool, click the Close button in the tool.
The Fault Record tool runs in the same process as PCM600 but in a separate
window. Multiple instances of the tool can be run at the same time. Any open tool
instances are closed without confirmation when PCM600 is closed.
Section 5 1MRS240044-IB A
Protection and control engineering
80 REF615R
Engineering Manual
To Next Page
Loading...
Need help?
General
