ABB Relion 620 Series - Programmable Push Buttons with Leds

To Next Page

To Previous Page

Commands

Table 7: Command push buttons

Name

Description

• Moving directly to main menu, if currently in any other menu.

• Moving between main menu, measurements and single-line diagram views.

R/L

Changing the control position (remote or local) of the device.

• When the R LED is lit, remote control is enabled and local control disabled.

• When the L LED is lit, local control is enabled and remote control disabled.

• When none of the LEDs are lit, both control positions are disabled.

Clear

• Activating the Clear/Reset view.

• Clearing indications and LEDs. The first three-second press clears the

indications. The second three-second press clears the programmable LEDs.

Requires appropriate user rights.

Help

Showing context sensitive help messages.

3.2.4 Programmable push buttons with LEDs

GUID-4D43320C-F429-4BD6-BECE-1CE6F6F94C30 V1 EN

Figure 5: Programmable push buttons with LEDs

1MAC456939-IB D Section 3

620 series overview

620 series ANSI 25

Operation Manual

Other manuals for ABB Relion 620 Series