GUID-B5E065E6-DAAF-447D-A684-D34CC16A3AAE-ANSI V2 EN
Figure 38: Warning indicating that the entered value is incorrect
• If writing values fails, a warning dialog box is displayed.
GUID-BEAAA196-1E0D-4FA5-BE91-E95F63401BDF-ANSI V1 EN
Figure 39: Warning indicating that the values were not written to the
protection relay
If writing is enabled accidentally, click Disable Write. Disable Write
cannot be selected when a value has already been written to the protection
relay. After clicking Write to IED, click either Commit or Reject.
4.2.8 Committing settings
Editable values are stored either in RAM or a nonvolatile flash memory. Values stored in
the flash memory are in effect also after a reboot.
1MAC456939-IB D Section 4
Using the HMI
620 series ANSI 63
Operation Manual
To Next Page
Loading...
