GUID-79832AA3-E883-4D37-BAB3-5CDAB211115C-ANSI V2 EN
Figure 36: Enable writing to edit a value
The selected setting group is shown in the Setting Group drop-down list. The active
setting group is indicated with an asterisk *.
5. Edit the value.
• The minimum and maximum values for a parameter are shown in the Min. and
Max. columns.
•
Setting group values are indicated with
.
GUID-8845E5EB-C84A-4A2F-A645-997427BB0538-ANSI V2 EN
Figure 37: Editing a value
• If the entered value is within the accepted value range, the selection is
highlighted in green. If the value is out of range, the row is highlighted in red
and a warning dialog box is displayed. Write to IED is unavailable.
Section 4 1MAC456939-IB D
Using the HMI
62 620 series ANSI
Operation Manual
To Next Page
Loading...
