ABB Relion 620 Series - Relay Parametrization

A071150 V3 EN
Figure 89: Active setting group
2.
Select the setting group with or .
3.
Press
to confirm the selection or to cancel.
A071152 V3 EN
Figure 90: Selecting the active setting group
4. Commit the settings.
Remember to document the changes you make.
8.5.3.2 Relay parametrization
Protection relay parameters are set via the LHMI, WHMI or PCM600.
Section 8 1MAC456939-IB D
Commissioning
134 620 series ANSI
Operation Manual