ABB Relion 620 Series - Controlling Via the Control Menu

The control position of the protection relay affects the controlling SLD
buttons. Depending on the parameter settings, the protection relay may
have to be in local state for the control to succeed.
6.2.2 Controlling via the control menu
The primary equipment can be controlled via the LHMI with the Open and Close buttons
when the protection relay is set to the local-control mode and accessing the control
operations is authorized.
1.
Press to open or to close the object.
•
If there are several controllable objects, select the object with and and
press to confirm the selection.
GUID-B44E0D8C-22B9-4BA4-8BE7-2C4EE9AA85F7 V1 EN
Figure 65: Selecting a controlled object
2.
To confirm the operation, select Yes and press .
1MAC456939-IB D Section 6
Operating procedures
620 series ANSI 91
Operation Manual