ABB Relion 620 Series - Section 4 Using the HMI; Using the Local HMI; Logging in

Section 4 Using the HMI
4.1 Using the local HMI
To use the LHMI, logging in and authorization are required. Password authorization is
disabled by default and can be enabled via the LHMI.
To enable password authorization, select Main menu/Configuration/
Authorization. Set the Local override parameter to “False”.
4.1.1 Logging in
1.
Press to activate the login procedure.
2.
Press or to select the user level.
A070888 V2 EN
Figure 11: Selecting access level
3.
Confirm the selection with .
4. Enter the password when prompted digit by digit.
•
Activate the digit to be entered with and .
•
Enter the character with and .
1MAC456939-IB D Section 4
Using the HMI
620 series ANSI 41
Operation Manual