ABB Relion 620 Series - Editing Values

GUID-55FB06BD-BCB4-4CDD-B947-7ED63B1745A4 V1 EN
Figure 35: Enabled settings
3. Click Save to save selected parameters in the .csv file format.
4. Click Print to print all the selected parameters.
4.2.7 Editing values
1. Select a menu in the left navigation bar.
2. Click a submenu to see function blocks.
3. Click a function block to see the setting values.
4. Click Enable Write.
Some parameters, for example the relay test mode, cannot be set via
the WHMI.
1MAC456939-IB D Section 4
Using the HMI
620 series ANSI 61
Operation Manual