ABB Relion 670 series - Page 1171

Name Values (Range) Unit Step Default Description
MaxMeasur4 0.05 -
10000000000.00
- 0.05 1000.00 Maximum value for measurement on input
4
MaxMeasur5 0.05 -
10000000000.00
- 0.05 1000.00 Maximum value for measurement on input
5
MaxMeasur6 0.05 -
10000000000.00
- 0.05 1000.00 Maximum value for measurement on input
6
MaxMeasur7 0.05 -
10000000000.00
- 0.05 1000.00 Maximum value for measurement on input
7
MaxMeasur8 0.05 -
10000000000.00
- 0.05 1000.00 Maximum value for measurement on input
8
MaxMeasur9 0.05 -
10000000000.00
- 0.05 1000.00 Maximum value for measurement on input
9
18.8.4 Function status auto-recloser for IEC 60870-5-103 I103AR
18.8.4.1 Functionality
GUID-7A132276-35A2-402C-9722-6259D65998F5 v1
I103AR is a function block with defined functions for autorecloser indications in monitor direction.
This block includes the FunctionType parameter, and the information number parameter is
defined for each output signal.
18.8.4.2 Identification
GUID-7B066282-79D7-480B-BEDE-3C04F0FCBF05 v1
Function description Function block
name
IEC 60617
identification
ANSI/IEEE C37.2
device number
Function status auto-recloser for IEC
60870-5-103
I103AR - -
18.8.4.3 Function block
GUID-FAC5A3DF-73CB-4A39-A213-5C21ACA05756 v1
I103AR
BLOCK
16_ARACT
128_CBON
130_BLKD
IEC10000289-2-en.vsd
IEC10000289 V2 EN-US
Figure 596: I103AR function block
1MRK 502 066-UUS B Section 18
Station communication
1165
Technical manual