PID-3630-OUTPUTSIGNALS v4
Table 507: RESIN2 Output signals
Name Type Description
ACK_F_B BOOLEAN All other bays have acknowledged the reservation request from
this bay
ANY_ACK BOOLEAN Any other bay has acknowledged the reservation request from
this bay
VALID_TX BOOLEAN The reservation and acknowledge signals from other bays are
valid
RE_RQ_B BOOLEAN Request from other bay to reserve this bay
V_RE_RQ BOOLEAN Check if the request of reserving this bay is valid
EXCH_OUT INTEGER Used for exchange signals between different ResIn blocks
14.3.11.4 Settings
PID-3629-SETTINGS v4
Table 508: RESIN1 Non group settings (basic)
Name Values (Range) Unit Step Default Description
FutureUse Bay in use
Bay future use
- - Bay in use The bay for this ResIn block is for future
use
PID-3630-SETTINGS v4
Table 509: RESIN2 Non group settings (basic)
Name Values (Range) Unit Step Default Description
FutureUse Bay in use
Bay future use
- - Bay in use The bay for this ResIn block is for future
use
14.3.11.5 Operation principle
M16503-3 v6
The reservation input (RESIN) function is based purely on Boolean logic conditions. The logic
diagram in Figure
459 shows how the output signals are created. The inputs of the function block
are connected to a receive function block representing signals transferred over the station bus
from another bay.
Section 14 1MRK 502 066-UUS B
Control
866
Technical manual
To Next Page
Loading...
