ABB Relion 670 series - Page 923

14.9 AutomationBits, command function for DNP3.0
AUTOBITS
SEMOD158589-1 v3
14.9.1 Identification
GUID-C3BB63F5-F0E7-4B00-AF0F-917ECF87B016 v4
Function description IEC 61850
identification
IEC 60617
identification
ANSI/IEEE C37.2
device number
AutomationBits, command function
for DNP3
AUTOBITS - -
14.9.2 Functionality
SEMOD158591-5 v7
AutomationBits function for DNP3 (AUTOBITS) is used within PCM600 to get into the
configuration of the commands coming through the DNP3 protocol. The AUTOBITS function plays
the same role as functions GOOSEBINRCV (for IEC 61850) and MULTICMDRCV (for LON).
14.9.3 Function block
SEMOD158603-4 v3
IEC09000925-1-en.vsd
AUTOBITS
BLOCK
PSTO
^CMDBIT1
^CMDBIT2
^CMDBIT3
^CMDBIT4
^CMDBIT5
^CMDBIT6
^CMDBIT7
^CMDBIT8
^CMDBIT9
^CMDBIT10
^CMDBIT11
^CMDBIT12
^CMDBIT13
^CMDBIT14
^CMDBIT15
^CMDBIT16
^CMDBIT17
^CMDBIT18
^CMDBIT19
^CMDBIT20
^CMDBIT21
^CMDBIT22
^CMDBIT23
^CMDBIT24
^CMDBIT25
^CMDBIT26
^CMDBIT27
^CMDBIT28
^CMDBIT29
^CMDBIT30
^CMDBIT31
^CMDBIT32
IEC09000925 V1 EN-US
Figure 479: AUTOBITS function block
1MRK 502 066-UUS B Section 14
Control
917
Technical manual