ABB Relion 670 series - Page 975

PID-3800-INPUTSIGNALS v4
Table 645: ANDQT Input signals
Name Type Default Description
INPUT1 BOOLEAN 1 Input signal 1
INPUT2 BOOLEAN 1 Input signal 2
INPUT3 BOOLEAN 1 Input signal 3
INPUT4 BOOLEAN 1 Input signal 4
PID-3800-OUTPUTSIGNALS v4
Table 646: ANDQT Output signals
Name Type Description
OUT BOOLEAN Output signal
NOUT BOOLEAN Inverted output signal
15.7.1.3 Technical data
GUID-23D4121A-4C9A-4072-BBE3-6DB076EDAB79 v1
Table 647: Number of ANDQT instances
Logic block Quantity with cycle time
3 ms 8 ms 100 ms
ANDQT - 20 100
15.7.2 Single point indication related signals combining function block
INDCOMBSPQT
GUID-13C9325D-D3A0-480F-9F3B-738A13E0ECF8 v3
GUID-EEBD65A5-394C-4ECD-BF6F-D556B610FC57 v2
The value of single point input (SP_IN) is copied to the value part of the SP_OUT output. The TIME
input is copied to the time part of the SP_OUT output. State input bits are copied to the
corresponding state part of the SP_OUT output. If the state or value on the SP_OUT output
changes, the Event bit in the state part is toggled.
INDCOMBSPQT can propagate the quality, the value and the time stamps of the signals via
IEC61850.
15.7.2.1 Function block
GUID-55B49FC7-8239-4891-BE16-29296A8F40BE v1
INDCOMBSPQT
SP_IN*
TIME*
BLOCKED*
SUBST*
INVALID*
TEST*
SP_OUT
IEC15000146.vsd
IEC15000146 V1 EN-US
Figure 503: INDCOMBSPQT function block
1MRK 502 066-UUS B Section 15
Logic
969
Technical manual