The default file name is the bay name+date.
By default, single-line diagram templates are saved in the drive where
PCM600 is installed <Drive:> \PCMDataBases\GDE\Templates
\<IED type folder>.
6.2.2 Importing a template
1. On the menu bar, point to Graphical Display Editor and select Import Display
Pages from Template or on the File menu, point to Display Editor Template
and click Import.
The Import GDE Template window appears with two sections, List of
Templates and Display Pages Preview.
2. Click Browse to select the template files.
The templates available in the folder appear in the List of Templates section.
3. Select a template file to preview the display pages available in the template file.
4. Once the display pages are selected, click Import to import the display page.
Multiple pages can be selected for the Import function.
6.3 HMI event filtering
HMI Event Filtering is a tool that helps in configuring visibility of events shown on the
LHMI and WHMI of the IED. This tool does not modify the actual events on the
protocol level, it only modifies the event visibility on the LHMI and WHMI.
The event tree view is used to modify the visibility of the events shown on the LHMI
and WHMI. Events in the tree view are structured in the same way as functions in the
PCM600 plant structure.
6.3.1 Starting HMI event filtering
Start HMI event filtering in one of the alternative ways.
• Right-click an IED and select HMI Event Filtering.
• On the Tools menu, click HMI Event Filtering.
6.3.2 Setting visibility of HMI events
1. Browse the event tree for the event.
Section 6 1MRS757810 C
LHMI engineering
104 REC615 and RER615
Engineering Manual
To Next Page
Loading...
