GUID-9230A349-8DCF-4495-A79F-500124D74E71 V3 EN
Figure 30: PCM600: Template information
4. Check and verify the template information and click Close to close the dialog
box.
The Create New Object from Template dialog box is displayed.
5. Delete, import or create a template by clicking the corresponding button.
• To delete the selected template, click Delete Template.
• To import a template from the selection window, click Import Template.
• To insert the selected IED to the bay, click Create.
It is possible to insert more than one IED from the Create New
Object from Template dialog box. The dialog box remains
open until Close is clicked .
6. Click Close when finished.
4.3.4 Inserting an IED by importing a .pcmi file
It is possible to create a new IED object in the plant structure by importing a .pcmi file.
1. In the Plant Structure view, right-click the bay and select Import.
1MRS757810 C Section 4
Setting up a project
REC615 and RER615 53
Engineering Manual
To Next Page
Loading...
