Connections made with the Signal Matrix tool are automatically also
shown in the Application Configuration tool.
GUID-6788DE03-BB9A-4A02-9DF6-D1645A8F4C4B V1 EN
Figure 53: Signal Matrix: a connection between binary input channels to binary
input signals
The Signal Matrix tool has a separate sheet for each possible combination.
• Binary inputs
• Binary outputs
• Analog inputs
• Functions
• GOOSE
5.4 Load Profile tool
Load Profile tool is used for reading load profile records of COMTRADE format from
a protection relay, clearing old records and viewing records via an external
COMTRADE viewer. The default viewer included with PCM600 is Wavewin, but a
third party viewer can be used.
5.4.1 Opening and closing Load Profile tool
• To open the Load Profile tool, click Load Profile Tool on the context menu of an
IED node inside the PCM600 project tree.
1MRS757810 C Section 5
Protection and control engineering
REC615 and RER615 79
Engineering Manual
To Next Page
Loading...
