3.2.1 Installing connectivity packages
• Install connectivity packages either by running the installer which can be
downloaded on the ABB Website or by using Update Manager when a network
connection is available.
Download connectivity packages from the ABB Web site
http://www.abb.com/substationautomation or directly with Update
Manager in PCM600.
3.2.1.1 Installing connectivity packages by using the connectivity package
installer
1. Close PCM600.
2. Run the ABB IED Connectivity Package RE_6xx Ver. n.msi installer.
(n = version number)
3. To install the connectivity package, follow the steps in the connectivity package
installation wizard.
3.2.1.2 Installing connectivity packages by using Update Manager
1. In PCM600, click Help and select Update Manager.
Run Update Manager with administrator rights.
GUID-7A72A86C-7F41-4342-AAF3-CF34E8279B4E V3 EN
Figure 4: Running Update Manager as an administrator
2. Select Get Connectivity Packages from the menu on the left column.
3. Select all the required connectivity packages.
4. Click Download and Install.
The status bar shows the installation status.
1MRS757810 C Section 3
PCM600 tool
REC615 and RER615 25
Engineering Manual
To Next Page
Loading...
