GUID-9EB5FAC2-9094-47E6-BA9F-3334C56D1F40 V1 EN
Figure 73: Graphical Display Editor: object properties view for text
insertion
6.1.2.2 Creating a complete HMI display page
1. Make a sketch of how to present the single-line diagram.
2. Place the apparatus, transformer and other symbols that are needed for the
single-line diagram into the raster boxes.
3. Add Junction points where needed.
4. Link the apparatus symbols with line elements.
5. In the Object Properties view, adjust the text symbols while writing to north,
east, south or west.
Section 6 1MRS757810 C
LHMI engineering
102 REC615 and RER615
Engineering Manual
To Next Page
Loading...
