ABB SACE Emax 2 Series - Page 187

ABB | SACE Emax 2
Mechanical accessories
1 - Mechanical Protection accessories
184 | © 2023 ABB | 1SDH001330R1002 - ECN000297030
HTC / LTC
(1)
: Terminal-cover
Terminal-covers are applied in order to reduce the risk of direct contact with live parts. They are available
in two types:
• HTC - High terminal-covers
• LTC - Low terminal-covers
(1)
Only for E1.2
Information on assembly is available on the website http://www.abb.com/abblibrary/DownloadCenter/,
in particular with the kit sheets:
• 1SDH000999r0612 for the high terminal-covers
• 1SDH000999r0613 for the low terminal-covers
PB
(1)
: Phase separators
The phase separators are applied in order to increase the insulation clearance between two adjacent
phases.
(1)
Only for E1.2
Information on the assembly is available on the website http://www.abb.com/abblibrary/
DownloadCenter/, in particular with the kit sheet 1SDH000999r0608.