ABB SACE Emax 2 Series

To Next Page

To Previous Page

ABB | SACE Emax 2

Ekip Touch - Interface and menus

2 - Navigation

Levels and pages

The Ekip Touch menu is divided into several levels, all accessible using the touchscreen display and

buttons available in the units:

Level 1 (HOME)

Page shown on power up; appears when push-button of the same name appears, as described on page

39; from here you can:

1. access the

MAIN PAGE

(level 2), by pressing the HOME button

2. access the

Alarm list

, by selecting the diagnostic bar at the bottom

3. access the

Summary pages

of some of the measurements by pressing on the edges

Figure 7

NOTE:

Ekip Touch is supplied with the Histograms page configured as HOME; if the

configuration is different, the Histograms can be set as the main page by pressing and

holding the

HOME

key for five seconds and confirming the message on the display

Level 2 (MAIN PAGE)

This page allows you to:

4. access one of the graphic pages:

Histograms

Measuring instruments

and

Measurements

5. access the MENU AREA (level 3)

Figure 8

Continued on the next page

ABB SACE Emax 2 Series - Navigation