ABB SACE Emax 2 Series - Accessories and Software

ABB | SACE Emax 2
Trip unit Overview
3 - Accessories and software
19 | © 2023 ABB | 1SDH001330R1002 - ECN000297030
3 - Accessories and software
Internal and external
accessories
The functions of Ekip Touch can be expanded by further internal and external accessories, which differ as
to function and assembly position; certain accessories can also be configured with Ekip Dip.
Internal modules
Name Function Page
Measurement
(1)
Measurement and supply from installation voltages 205
Ekip Signalling 4K
(2)(5)
Programmable digital inputs/outputs 208
Ekip LCD LCD interface for aggressive environments 211
Rating Plug
(3)(6)
Defines rated current In 204
External modules for assembly in upper terminal box
(5)
:
Name Description Page
Ekip Supply
(6)
Power supply of Trip unit and modules in terminal box
Ekip Com
(4)
Communication between Trip unit and external buses (various
protocols)
212
Ekip Link
(4)(6)
Communication between Trip units via an intranet with ABB
proprietary protocol
236
Ekip Signalling 2K Programmable digital inputs/outputs 244
Ekip Signalling 3T Measurement from current loop and temperature sensors 253
Ekip Synchrocheck
Measurement of an external voltage and management of
synchronism between two supply sources
247
Other external modules and accessories:
Name Description Page
Ekip Signalling 10K
(5)(6)
Programmable digital inputs/outputs 256
Ekip Multimeter
(5)(6)
Panel front display 257
Toroid S.G.R. Sensor for protection from earth fault currents 257
Toroid Rc Sensor for protection from residual currents 257
External neutral
(6)
Sensor for protecting the external neutral line with 3P
circuit-breaker
258
In addition, the supervision, configuration and reporting functions are provided by further modules for
temporary communication and supply:
Name Description Page
Ekip TT
(6)
Supply and tests
259
Ekip T&P
(6)
Supply, communication, programming and tests
Ekip Programming
(6)
Supply, communication and programming
(1)
Version and availability of the module depend on the Trip unit model and on activation of the
measurements package
(2)
Configurable with circuit-breakers E2.2, E4.2 and E6.2
(3)
Assembled by default at the time equipment is ordered; can be replaced afterwards with a model
of a different size
(4)
Always supplied with contacts Ekip AUP and Ekip RTC
(5)
Presence of auxiliary supply required and, for terminal box models, of Ekip Supply
(6)
Accessory also available and compatible with Ekip Dip
Additional functions
Ekip Touch can be equipped with further software configurations compliant with different functional
applications:
• Power Controller
• Load Shedding
• Interface protections (IPS)
• Synchro reclosing
• Embedded ATS
For details consult the
Technical catalog or the summary documents of each function (page 14).
213