ABB SACE Emax 2 Series - Protection Adaptive

To Next Page

To Previous Page

ABB | SACE Emax 2

Ekip Touch - Protections

8 - Protection Adaptive

The Adaptive Protection package is available by default for Ekip Hi-Touch and Ekip M Touch and

configurable in the remaining models as additional SW package.

The protection is described below:

Dual Set

The function enables two different protection configurations to be made, one as an alternative to the

other, by means of a set change with programmable events.

The function can be activated in the

Settings

Dual Set

menu (page 49)

Parameter Description Default

Enable

Activates/deactivates the function OFF

Default Set

Defines the sets of main and secondary protections (which

activate in the presence of the programmed event)

Set A

The event that determines set change (from default to secondary) can be programmed in the

Advanced

Functions

menu, see the paragraph Programmable Functions and Commands (page 92).

Other manuals for ABB SACE Emax 2 Series