ABB | SACE Emax 2
External electronic accessories
1 - Ekip Supply
212 | © 2023 ABB | 1SDH001330R1002 - ECN000297030
External electronic accessories
1 - Ekip Supply
Ekip Supply
is an accessory supply module. It is available in two models, depending on the incoming
voltage to be provided.
It performs three functions:
• supplies auxiliary power to Ekip Touch
• allows the terminal box modules to be supplied and connected to Ekip Touch
• acts as a bridge for the Local Bus between Ekip Touch and the external electronic accessories (e.g.
Ekip Signalling 10K
and
Ekip Multimeter
)
The module has a Power led to signal the presence of incoming power supply:
• off: power supply absent
• on (steady): power supply present
Electrical characteristics
Model
Ekip Supply
24-48VDC
Ekip Supply
110-240 VAC/DC
Power supply voltages 21,5 ÷ 53 VDC 105 ÷ 265 VAC/DC
Frequency -- 45 ÷ 66Hz
Maximum power consumption without modules
(1)
3 W 3 VA/W
Maximum power consumption with modules
(2)
10 W 10 VA/W
Maximum inrush current 2 A for 20 ms 2 A for 20 ms
(1)
Ekip Touch with just Ekip Supply
(2)
Ekip Touch with three modules connected
Connections
The module must be assembled in the first slot of the terminal box on the circuit-breaker (fixed version)
or on the fixed part (withdrawable version).
For references about the connection and terminals, please consult document 1SDM000091r0001; use
AWG 22-16 cables with 1.4 mm maximum outer diameter for the external cabling.
To connect the module to Ekip Touch, please consult document 1SDH001000r0511.
To Next Page
Loading...
