ABB SACE Emax 2 Series - Standard Protections

ABB | SACE Emax 2
Ekip Touch - Protections
2 - Standard Protections
55 | © 2023 ABB | 1SDH001330R1002 - ECN000297030
2 - Standard Protections
List
The Standard protections available for all Ekip Touch models, are:
Name Type of protection Page
L Overload with inverse long-time delay 56
S Selective short-circuit 57
S2 Short-circuit with adjustable delay 58
I Instantaneous short-circuit 59
G
(1)
Earth fault with adjustable delay 60
MCR Instantaneous short-circuit on circuit-breaker closing 61
2I Instantaneous short-circuit programmable 62
IU Current unbalance 63
Neutral Different protection on neutral phase 63
Harmonic
distortion
Distorted waveforms 64
T Abnormal temperatures 64
Hardware Trip Internal connection errors 64
linst
(2)
Instantaneous short-circuit at high currents 64
(1)
not available with LSI version of Ekip Touch
(2)
protection cannot be deactivated; its trip parameters are set by ABB and cannot be edited