ABB | SACE Emax 2
Mechanical characteristics
1 - E1.2 description
152 | © 2023 ABB | 1SDH001330R1002 - ECN000297030
Continued from the previous page
7. Check that the circuit-breaker is open (open / closed indicator "O - OPEN"), and check that the
springs are discharged (spring signalling device "white - DISCHARGED SPRING") as indicated in
Figure 48.
Figure 48
Mechanical status indicators
The following are the possible states in which you can find the circuit-breaker:
1. Circuit-breaker open with springs discharged (see Figure 49).
2. Circuit-breaker open with springs charged (see Figure 50).
3. Circuit-breaker closed with springs discharged (see Figure 51).
4. Circuit-breaker closed with springs charged (see Figure 52). This state occurs when after closing
(see step 4 - Figure 52) the springs are recharged manually or automatically by the gearmotor (if
provided).
Figure 49 Figure 50 Figure 51
Figure 52
To Next Page
Loading...
