ABB SACE Emax E4.2 - Page 280

ABB | SACE Emax 2
274 | © 2017 ABB | 1SDH001330R0002 - ECN000058721 Rev. A Mechanical accessories | 4 - Operating modes for E2.2-E4.2-E6.2
Continued from the previous page
To extract the moving part from the fixed part, perform the same steps indicated for insertion in reverse order.
Figure 63
Always use both levers of the guides on the fixed part when racking out the circuit-breaker. See Figure 63.
NO!
OK
=
=
Figure 64
WARNING! When withdrawing the moving part, make sure that both guides on the
fixed part travel to the same extent, thereby keeping the moving part parallel to the
fixed part. See Figure 64.