1SDH002031A1002 ECN000092998 Rev. B SACE Tmax XT2 – XT4 | 168
In the About-Modules menu the specific menu of the module is available that contains:
the serial number and the version of the module
the status of the inputs (On/Off) and of the outputs (Open/Closed)
If the Ekip Signalling 2K module is detected correctly, the test area in the Test menu is activated.
For details of test characteristics, see page 120.
From the service connector (via Ekip Connect) or with a system bus communication, additional
information is available on the version and the status of the module: HW and Boot version, CRC
status (correctness of SW in the module).
To Next Page
Loading...
