ABB SACE Tmax XT2 - Page 185

1SDH002031A1002 ECN000092998 Rev. B SACE Tmax XT2 – XT4 | 185
Information on
menu
If the module is detected correctly by Ekip Touch, the following information is available on the
About-Modules menu:
Information
Description
SN and version
Identification and SW version of the module
IP address
Address of the module, assigned to the module by a DHCP server at
the moment of the connection to the network in the event of
configuration with dynamic IP or can be set by menu in the case of a
static IP
NOTE: without a DHCP server, the module automatically
adopts a causal IP address in the interval 169.254.xxx.xxx
Network Mask
Subnet mask; identifies the method for recognizing the subnet to which
the modules belong and enables modules to be searched for within a
defined set of recipients
Gateway address
IP address of the node to which the module is connected, in the
presence of several subnets
TCP Client 1, 2, 3
IP addresses of the client devices connected to the module (in Server
mode)
MAC Address
Address assigned by ABB with OUI (Organizationally Unique Identifier)
equal to ac:d3:64 that identifies uniquely the manufacturer of an
Ethernet device