- 70 -
000031BG
General conditions
Before checking the operation of the equipment, it is necessary to have
a thorough knowledge of the INSTRUMENTS chapter and the functions
that have been enabled in the installation.
The equipment operates automatically without the aid of an operator;
operating state is controlled through the instruments.
The interpretation or variation of some data is reserved exclusively for specialized and
qualied staff.
The incoming voltage must not exceed the maximum values shown in the technical data in
order to avoid damaging the equipment.
Consult the technical data for further details.
Even during operation, check that the environmental and logistic
conditions are correct (see installation chapter).
Make sure that the said conditions have not changed over time and that
the equipment is not exposed to adverse weather conditions and has not
been isolated with foreign bodies.
7
Operation
To Next Page
Loading...
