ABB TTR200 - Description of Parameters

Communication and configuration
OI/TTR200-EN TTR200 27
Pos: 19.14 /Überschri ften/1.1/1-spa ltig/P - R/Parameterbesc hreibung @ 8\mod_11744 88666890_3101.doc @ 73934
7.7 Description of parameters
Pos: 19.15 /Konfigur ation, Parametrierung/ Temperatur/TTR20 0/Parameterbeschr eibung @ 15\mod_11958157 92125_3101.doc @ 142558
Device
parameters
Description DTM parameters Effective range
Yes: locked
Write protection
Activates write protection for the
entire device.
<Basic Parameters>
<General>
<Write Protection>
No:
Enter
password:
unlocked
0110
Sensor Type
Select sensor type: <Device>
<Configuration>
<Sensor / Sensor Type>
Pt100 (IEC751)
Pt1000 (IEC751)
Thermocouple type K (IEC584)
Thermocouple type B (IEC584)
Thermocouple type C (ASTME988)
Thermocouple type D (ASTME988)
Thermocouple type E (IEC584)
Thermocouple type J (IEC584)
Thermocouple type N (IEC584)
Thermocouple type R (IEC584)
Thermocouple type S (IEC584)
Thermocouple type T (IEC584)
Thermocouple type L (DIN43710)
Thermovoltage – 125…125 mV
Thermovoltage –125…1100mV
Resistance 0 …. 500 
Resistance 0 …. 5000 
Pt10 (IEC751)
Pt50 (IEC751)
Pt200 (IEC751)
Pt500 (IEC751)
Pt10 (JIS1604)
Pt50 (JIS1604)
Pt200 (JIS1604)
Pt10 (IMIL24388)
Pt50 (IMIL24388)
Pt100 (MIL24388)
Pt200 (MIL24388)
Pt1000 (MIL24388)
Ni50 (DIN43760)
Ni100 (DIN43760)
Ni120 (DIN43760)
Ni1000 (DIN43760)
Cu10 (a=4270)
Cu100 (a=4270)
Type of
connection
Sensor connection type relevant for
all Pt, Ni, Cu resistance sensor types
<Device>
<Configuration>
<Sensor / Connection>
2-wire
3-wire
4-wire
Line resist-
stance
Sensor resistance relevant for all Pt,
Ni, Cu resistance sensor types in 2-
wire sensor transmitter connection
type
<Device> <Configuration>
<Sensor / Line Resistance>
0 … max. 100 