ABB TZIDC - Jumper Configuration (TZIDC-120)

Electrical connections
26 TZIDC, TZIDC-110, TZIDC-120 42/18-84-EN
5.2 Jumper configuration on mainboard (TZIDC-120 only)
M00494
1
2
Fig. 17
1 Simulation
2 Write access
There are two jumpers on the mainboard that can be used to activate or block simulation mode
and write access. Set the jumpers as shown below:
M00495
1
2
Fig. 18
1 Block (Simulation blocked
1)
)
2 Activate (Write access enabled
1)
)
1) Default setting (complies with Fieldbus Foundation standard)