Commissioning
34 TZIDC, TZIDC-110, TZIDC-120 42/18-84-EN
5. Switch to parameter 3.3 (Return to operating level) and save the new setup:
• Press
and hold
• Press
twice briefly
conf
mA
%
C
°
is displayed
• Release
• Press
briefly to select
• Press
and hold till the countdown goes from 3 to 0
The new parameter setting is saved and the positioner automatically returns to the working level
and continues to run in the operating level that was active before calling up the configuration
level.
To Next Page
Loading...
