ABEM Terraloc Pro 2
17
• Press <ENT> to accept the first stacking
• Trigging once more by pressing <CTRL> + <ARM> will replace the traces on
the screen with a new set that looks a little bit different. What you see now is the
average of the two measurements made so far
• Press <ENT> to accept the second stacking
• Press <SAVE> to save the data (the message “No data” will be displayed) or
press <ESC> to disarm the instrument (the message “Data in memory” will be
displayed)
• When you are finished getting acquainted with the instrument, you may shut it
down. Press <CTRL> + <SPACE> for the quick menu and select "Power Off"
among the menu items. Press <ENT> when the confirming dialog appears
• Now you should have learned a little about how to operate the instrument. Do
not be afraid to test different settings and modes. There is no risk of causing any
damage.
To Next Page
Loading...
