EN - 2
CAT2
EN Translation of the original operating instructions
© The manufacturer reserves the right, at any time and without prior notice, to make such changes
and amendments to these operating instructions as become necessary due to misprints, inaccuracies
or product enhancements. Such changes will, however, be incorporated into subsequent editions of
the operating instructions.
All brand names and trademarks that appear in these operating instructions are the property of their
respective owners/manufacturers.
Our latest product documents as well as all contact details for the ABICOR BINZEL national
subsidiaries and partners worldwide can be found on our website at www.binzel-abicor.com
1 Identification EN-3
1.1 EU Declaration of Conformity EN-4
2 Safety EN-6
2.1 Designated use EN-6
2.2 Responsibilities of the user EN-6
2.3 Personal protective
equipment (PPE) EN-6
2.4 Classification of the warnings EN-7
2.5 Warning and information signs EN-7
2.6 Emergency information EN-7
3 Product description EN-8
3.1 Technical Data EN-8
3.2 Abbreviations EN-11
3.3 Nameplate EN-11
3.4 Signs and symbols used EN-11
4 Scope of delivery EN-12
4.1 Transport EN-12
4.2 Storage EN-12
5 Functional Description EN-13
6 Putting into operation EN-14
6.1 Fastening the CAT2 to the
robot EN-14
6.1.1 CAT2 HL EN-17
6.2 Adjusting TCP EN-18
6.3 Connect the helix cable EN-18
6.4 Activating the LED function EN-18
7Operation EN-19
8 Putting out of operation EN-19
9 Maintenance and cleaning EN-19
9.1 Maintenance intervals EN-20
10 Troubleshooting EN-21
11 Dismounting EN-22
12 Disposal EN-23
12.1 Materials EN-23
12.2 Consumables EN-23
12.3 Packaging EN-23
To Next Page
Loading...