EN - 12
4 Scope of delivery CAT2
4 Scope of delivery
The standard scope of delivery includes the following components:
Order the equipment parts and wear parts separately.
Order data and ID numbers for the equipment parts and wear parts can be
found in the current catalogue. Contact details for advice and orders can be
found online at www.binzel-abicor.com.
4.1 Transport
Although the items delivered are carefully checked and packaged, it is not
possible to exclude the risk of transport damage.
4.2 Storage
Physical storage conditions in a closed room:
Tab. 2 Ambient conditions for shipment and storage on page EN-8
• CAT2 robot mount • Operating instructions
Accessories kit: • Dowel screw M8 with washer and nut
• Connecting cable • Dowel screw M6 with washer and nut
• 4 cylinder screws M4x10 • 4 protection caps
Option: • Mount
Accessories: • TCP alignment jig to check the adjusted TCP in the extension of
the Z axis of the robot with built-on welding torch
• Tools for spring change
Tab. 10 Scope of delivery
Goods inspection Use the delivery note to check that everything has been delivered.
Check the delivery for damage (visual inspection).
In case of complaints If the delivery has been damaged during transportation, contact the last
carrier immediately. Retain the packaging for potential inspection by the
carrier.
Packaging for
returns
Where possible, use the original packaging and the original packaging
material. If you have any questions about the packaging and/or how to secure
an item during shipment, please consult your supplier.
Tab. 11 Transport
To Next Page
Loading...